- This topic has 2 replies, 3 voices, and was last updated 20 years, 6 months ago by
.
-
Posts
-
BUILT IN 🙁 🙁 🙁 Going to this one tomorrow, customer says works for part of the prog then stops with 35 mins to go. Light flashing ( Looks like a tap symbol).
Not familiar with this machine, any pointers please.
MIKERe: ZAN ZDS689EX D/WASHER
I had one of these Zanussi built in dishwashers, it had a stainless steel door panal on it, to be fair it looked more like an oven. The tap symbol was on so I extracted the thing and cleaned the pipe beneith the plynth thats about 12″ long. I also cleaned round the connection to the decalsifier unit, sugested she trys it again, and its worked. Infact she came into my shop to buy a microwave oven and she told me it was working fine. Hope your jobs the same.
Regards.
Rob. (P.S. I had to release flood protection on fill valve also.)Re: ZAN ZDS689EX D/WASHER
I think you got lucky there Rob – if you catch these early enough you can get away with the transfer pipes. All too often the matrix (or IWMS) gets choked and it all gets rather expensive.
Too many people say “no” and a BER follows. Shame, as it’s usually the customers own fault for not rinsing off the heavy stuff from the crockery.
Chris.
- You must be logged in to reply to this topic.