NAIKO DW040

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12408
    mbdas
    Participant

    Can anyone tell me the part no and price or were to get the part from for one of these I need the clear plastic part that fits on the stainless steel side of the door
    thanks mark

    #149509
    AMS
    Participant

    Re: NAIKO DW040

    A quick search on google shows a Naiko Ltd in Leeds on 01937 579888. Don’t know if this is them but it’s a start. Incidentally, I went to one of these machines this morning for an overfilling snag. Wasn’t looking forward to going as a) it’s a bit of an unknown brand, b) It’s about the size of a large microwave and c) the machine only cost £70 new from Safeway! However, I was pleasantly surprised to find that it is actually quite a good machine especially in view of the ridiculously low purchase price. Also, when you get the cover off, it’s not too bad to work on – certainly better than those horrid little Bosch things! Anyway, the problem turned out to be a gunge in the hose from the sump to the float chamber and in the float chamber itself.

    Dave

    #149510
    mbdas
    Participant

    Re: NAIKO DW040

    YE There about 18 months old round here I’ve been doning a few, all have been the same fault as yours nice easy job but this is the first one I’ve needed spares for
    will keep trying
    thanks

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.