Diplomat APM 8721 – Trips Circuit Breaker on Spin

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Diplomat APM 8721 – Trips Circuit Breaker on Spin

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 7, 2005 at 6:17 pm #12431
    rhk001
    Participant

    Hi there, can anyone help?

    The Machine is only about 1 year old, I dont have the warranty (A long Story about a bad Builder).

    First thing that stopped working is the dryer – it wont dry anymore (Yes even with the 1/2 load switch turned on)

    A few weeks later, it has a new trick which is to trip the power when it goes into it final spin cycle.

    Anyone have an ideas or is this one for my Local repair man?

    Thanks for looking

    October 7, 2005 at 6:23 pm #149660
    NWAR
    Moderator

    Re: Diplomat APM 8721 – Trips Circuit Breaker on Spin

    Could be one of many things, to be honest. There’s a fair chance there’s a broken wire in the harness if there has been installation issues (bad builder?) and the machine has been subject to particularly bad vibration.

    If you do fancy having a look yourself the pull the plug first please :zap: but I would recommend calling in a local pro (Repairs@) to have it properly checked out.

    Craig

    October 13, 2005 at 6:23 am #149661
    rhk001
    Participant

    Re: Diplomat APM 8721 – Trips Circuit Breaker on Spin

    Hi Craig,

    Thanks for the reply – I think you are right the balance of the machine has not been great so it is likely that a cable or two has come loose, I will try one of the recommended technicians on this site.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.