whirlpool falt codes (adp 7966 with error code F8 )

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool falt codes (adp 7966 with error code F8 )

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 11, 2005 at 3:08 pm #12511
    ikossan
    Participant

    hello everyone;
    I have a problemme on the machine, it indicates on the display a F8 code and it stop. can you get me a document which gives me all the possible error codes and its diagnosis…. 😥

    October 11, 2005 at 3:58 pm #149986
    Dave_Conway
    Participant

    Re: whirlpool falt codes ( adp 7966 with error code F8 )

    We can’t give you all that information I’m afraid ikossan as we are restricted on it’s use.

    F8 is a water level problem basically which could have a few causes. Check all the filters for blockages and check that the dishwasher hasn’t filled with foam recently (possibly caused by incorrect/poor detergent).

    Apart from that, it’s engineer time in all honesty, try Repairs@ for one 🙂

    Dave.

    October 11, 2005 at 4:32 pm #149987
    ikossan
    Participant

    Re: whirlpool falt codes (adp 7966 with error code F8 )

    🙂 🙂 🙂 🙂 Thank you very much Dave_Conway. 🙂 🙂 🙂 🙂
    I found a document which to define how to make a test on the machine and how to know the significance of the error codes damage which the document is not for same the model whirlpool 7966.
    .
    Look at this link http://www.stokes-aus.com.au/StokesAP/info_sheets_Whirlpool_Dishwasher.asp

    October 11, 2005 at 4:58 pm #149988
    Dave_Conway
    Participant

    Re: whirlpool falt codes (adp 7966 with error code F8 )

    😯

    Thanks for the link, we aren’t able to publish that sort of thing in the UK 😆

    Good old Aussies 😉

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.