Indesit DV62ix Timer wiring

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DV62ix Timer wiring

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 12, 2005 at 2:25 pm #12538
    mruphillgard
    Participant

    I hope someone can help……I just moved house and inherited an Indesit DV62ix dishwasher. The handle of the dishwasher was cracked and the past owners had left the replacement part. So I decided to change the panel and memorised the wiring connections for the timer.
    The problem is, it took me around 45 minutes to get the timer out of the panel and then I forgot the wiring sequence.
    Can anybody tell me this? I have two Brown wires one with a plastic cover the other just a spade connection and the same setup with the two Blue wires.
    I would appreciate any help.

    Thanks

    Gareth 🙄

    October 12, 2005 at 4:28 pm #150156
    iadom
    Moderator

    Re: Indesit DV62ix Timer wiring

    Gareth, Indesit will not even give this info to the trade. There should have been no reason to remove the wiring from the timer to change handle or front console. You must have more faith in your memory than I have in mine. 😉

    You may get lucky by trying Repairs@ and find a local engineer who may have worked for Indesit in the past, failing that then I am afraid that you will have to go to Indesit themselves. 😥

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.