Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Tricity Bendix BDW60 “all lights flash”
- This topic has 5 replies, 2 voices, and was last updated 20 years, 6 months ago by
leavemetogetonwithit.
-
AuthorPosts
-
October 12, 2005 at 3:46 pm #12541
leavemetogetonwithit
ParticipantGot a phone call just now.
Luckily(?) she’s busy till Monday so I’ve got all that time to think about it 😡
She says it fills ok but then after “whurr-whurring” (pump?) for a short time it stops and stands all lights flashing. She says there are 3 on the left side plus the one over the selected programme and they flash continuously without pauses.
Anyone got any info. on this model, please?October 12, 2005 at 4:12 pm #150162Dave_Conway
ParticipantRe: Tricity Bendix BDW60 “all lights flash”
It has one of those nasty dual direction pumps, I’ll bet that’s the problem 😉
50267491004 is the part number if that’s the problem.
Dave.
October 12, 2005 at 7:13 pm #150163leavemetogetonwithit
ParticipantRe: Tricity Bendix BDW60 “all lights flash”
Thanks Dave,
I’ll let you know by Tuesday if you were right. 🙂
MikeOctober 17, 2005 at 9:24 pm #150164leavemetogetonwithit
ParticipantRe: Tricity Bendix BDW60 “all lights flash”
Dave,
Award yourself a good gloat, you deserve it 😀 .Got there to find a sump full of very manky water. Wished I had invested in one of those syringe things Martin and others use. Asked customer for small cup for bale out and she produced small measuring jug. Most of the water ended up on her kitchen floor.
Pulled out motor. rear blades mostly gone.
So methinks your posting saved me considerable time searching. 😀
Thanks again,
Mike.October 17, 2005 at 9:32 pm #150165Dave_Conway
ParticipantRe: Tricity Bendix BDW60 “all lights flash”
You can guy the impellors kit for these if the motor is OK 🙂
Part number 50267511009 about £15 odd I think.
Dave.
October 17, 2005 at 10:37 pm #150166leavemetogetonwithit
ParticipantRe: Tricity Bendix BDW60 “all lights flash”
Yep,
That’s another thing I had already learned from a previous discussion!
Though apparently there’s more than one version of the blades and you have to make sure you’ve got the right ones? So I brought the old ones away with me. No rush on this job as I’m off to “live the dream” for ten days from Thursday. Did I hear some quiet sighs of relief coming from out there in cyberspace?
Mike. -
AuthorPosts
- You must be logged in to reply to this topic.
