ariston lsi 68 aaa uk dead

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12666
    streetlighter
    Participant

    Hi all
    Problem with a ariston lsi 68 aaa uk integral dishwasher.
    has had a leak for a while but now 1 beep and no lights ( only when program switch is held in on swithch on) otherwise is silent.
    leak under floor but when dryed out so float drops it still doesn’t start up.
    mains light comes on but cant select program or start it.
    Is there a way of resettting or doing a test on this. it has 6 lights not 4.
    cant seem to get a last fault code to come up either, possibly lights 3,4,5,6 came on but only for a second cant understand this.
    Am I looking at a wash pump and modual or posibly other things.
    All help is appreciated.

    Ta Paul

    #150877
    clivejameson
    Participant

    Re: ariston lsi 68 aaa uk dead

    Sounds like it’s still damp in there somewhere…seem to remember there’s a mod for the lower door seal too?
    Best bet is to leave it to dry thoroughly before proceeding i would think. (and have a good check for insulation on the components at the bottom) 😉

    #150878
    streetlighter
    Participant

    Re: ariston lsi 68 aaa uk dead

    Thanks Clive
    Yes was full of water and wash pump going rusty, now drained.
    Does any one know how to reset the modual or to do the test sequence if there is one or find latest fault code. 😳

    Ta

    Paul

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.