tool box

Home › Forums › General Trade Forum › tool box

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 20, 2005 at 7:50 am #12693
    pup
    Participant

    what kind of tool box ? i am after a good tool box whit tool
    thanks

    October 20, 2005 at 8:37 am #151057
    Dave_Conway
    Participant

    Re: tool box

    How much are you looking at spending pup ?

    RS Components do a few nice ones but you could be looking at £200+ 😯

    Snap on are another good supplier.

    Dave.

    October 20, 2005 at 3:11 pm #151058
    Twoten
    Participant

    Re: tool box

    I replace my tool box last year. I went from a conventional box to a rigid shell tool-case. I checked out RS, Maplins and any others I could find and found Europart do one, part number 55-SE-34. It’s made by Hepco & Becker and is the Budget case. The tool panels inside are made specifically for Europart so if you can put up with the gaudy Blue with yellow trim (check out the special models section on there website http://www.hepco-becker.de/werkzeugkoffer_eng/frameset.php)) it’s not a bad tool case.

    I’m not sure I would get a tool kit with the tools complete; you will probably end up with quite a few tools that are not used and still have to buy others that are not provided.

    Keith.

    October 20, 2005 at 5:09 pm #151059
    pup
    Participant

    Re: tool box

    i was thinking about 200 pound mark looking for a.b.s case type
    ta

    October 20, 2005 at 7:16 pm #151060
    Twoten
    Participant

    Re: tool box

    The Europart ABS Tool Case without the tools was about £70 inc VAT about 18 months ago.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.