Old Blomberg Wash m/c WA1210…Variable Thermostat

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Old Blomberg Wash m/c WA1210…Variable Thermostat

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #12867
    laurenceuk
    Participant

    Hi,

    I need a variable thermostat for the above, it also acts as the ON/OFF switch.

    Where can I get one from please.

    Thanks,

    Laurence

    #151987
    Dave_Conway
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    Can you get any other numbers from the rating plate Laurence as there are a few versions, it’s a Brandt by the way 🙂

    Dave.

    #151988
    laurenceuk
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    Thanks Dave,

    I have`nt access right now but it is a 9 tag stat in case that helps.

    Laurence

    #151989
    Dave_Conway
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    It doesn’t I’m afraid Laurence 🙁

    #151990
    laurenceuk
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    Hi,

    I thought I might have to go out again as the couple are elderly but I remembered the details where in the filter flap so rang them and these are the numbers available.

    Typ. WA284AE
    Ident No. 17652405
    Ser No. 00001282
    M300 750/80W ?
    Spin 1200rpm

    Hope this is sufficient.

    Thanks again

    Laurence

    #151991
    Dave_Conway
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    That’s confused me even more 😕

    None of those numbers have any bearing on the WA1210, in fact it”s another appliance entirely by the looks of it…

    Dave.

    #151992
    laurenceuk
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    Hmmm,

    Is there a number that is in a particular format that can be identified.

    Laurence

    #151993
    Dave_Conway
    Participant

    Re: Old Blomberg Wash m/c WA1210…Variable Thermostat

    Indeed, sorry I should’ve mentioned that..

    The “tech ref” begins 00.201.??????

    Dave.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.