- This topic has 8 replies, 4 voices, and was last updated 20 years, 5 months ago by
.
-
Posts
-
Can any body help with the part number for Sole Brushes.
Electrical connection to these brushes is on the top side of the brush. I did manage to get some from Homespares but they have now changed the design and are no longer of any use. I beleive they are also fitted to one of the indesit machines. They are not listed on the Distripart disc.Please help. genuine prefered which is what homespares did have in there packaging 9894.
Re: Zanussi Carbon Brushes
Welcome to the site 🙂
What model Zanussi do you refer to, as most brush terminals either exit to the side (l or r) or below?
Re: Zanussi Carbon Brushes
ZWF1221 definitley has this type of carbon brush fitted. I can get the part no: for the motor but no brushes listed @ Zanussi.
Re: Zanussi Carbon Brushes
ZWF1221 definitley has this type of carbon brush fitted. I can get the part no: for the motor but no brushes listed @ Zanussi.
Thanks for the welcome Martin
Re: Zanussi Carbon Brushes
fennyapps wrote:ZWF1221 definitley has this type of carbon brush fitted.
No such model listed :con:
ZWF1220 and ZWF1210 is all can find????
Model No:ZWF1221W
Product No:914215105Motor no:124 21 23-05/5
You will come across these brushes soon. This is a brand new Model.
The brushes have been out for a little while though.
Re: Zanussi Carbon Brushes
I just looked at 9894 on the Homespares website and they look the same as those in the 2003 catalogue. I only carry the white holder brushes for sole motors, Homespare 3141 or similar but have used them to replace the other types, the only difficulty being the larger spade size. What is the problem with the current Homespares ones?
- You must be logged in to reply to this topic.