- This topic has 2 replies, 3 voices, and was last updated 20 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Just got this one in. Have changed interlock even though it seems old one is OK. Have bypassed interlock neither of which stops the above error message. Module??
Re: Hotpoint Ultima WM76 – Error Message ‘close door’
Usually a blown track on the back of the power board and a blown triac on the control board.
Bob
Re: Hotpoint Ultima WM76 – Error Message ‘close door’
Is it locking the door? If not, have a look at the tracks on the control pcb as this provides the interlock neutral. The switched live (white) from the interlock goes to the power pcb. If you do need a new control module it needs to be configured to tell it what model it’s in.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.