diplomat dishwasher not working

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › diplomat dishwasher not working

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 18, 2005 at 9:10 am #13404
    kemlow
    Participant

    Can you help me I have a Diplomat type 12043
    Model no ADP 8132 it is about three years old
    When I put it on it runs for about ten minutes and then stops
    It has got five settings with five lights on the left-hand side
    When it stops three of the lights on the left hand side flash
    One has a symbol for rinse
    One has a symbol for glasses
    And one which says ECO
    The dish and pots symbols do not flash
    This happened about two months ago and all I did was pull the machine out check the inlet and out let pipes were clear put it back and it work
    I have tried this again this time but it still does not work I guess I was just lucky last time
    Thank you
    Tony

    November 18, 2005 at 9:37 am #154678
    NWAR
    Moderator

    Re: diplomat dishwasher not working

    Going from left to right could you number the lights 1 – 5 then post back which lights are flashing?
    Likely results are 1, 2 & 5 or 2, 3 & 5

    November 18, 2005 at 9:52 am #154679
    kemlow
    Participant

    Re: diplomat dishwasher not working

    NWAR wrote:Going from left to right could you number the lights 1 – 5 then post back which lights are flashing?
    Likely results are 1, 2 & 5 or 2, 3 & 5

    from left to right 1,2,3 flashing

    November 18, 2005 at 9:57 am #154680
    Dave_Conway
    Participant

    Re: diplomat dishwasher not working

    E7 fault then which normally is resolved by the reset procedure.

    Using the search function here:

    http://www.ukwhitegoods.co.uk/modules.p … ile=search

    Type “diplomat and reset” in to the search field (without the quotes), that should help 🙂

    Dave.

    November 18, 2005 at 10:06 am #154681
    kemlow
    Participant

    Re: diplomat dishwasher not working

    Dave_Conway wrote:E7 fault then which normally is resolved by the reset procedure.

    Using the search function here:

    http://www.ukwhitegoods.co.uk/modules.p … ile=search

    Type “diplomat and reset” in to the search field (without the quotes), that should help 🙂

    Dave.

    sorry do not understand how to reset

    November 18, 2005 at 10:12 am #154682
    Dave_Conway
    Participant

    Re: diplomat dishwasher not working

    Here you go:

    http://www.ukwhitegoods.co.uk/modules.p … pic&t=3017

    Dave.

    November 18, 2005 at 10:25 am #154683
    kemlow
    Participant

    Thank you very much i will try this at the weekend

    November 21, 2005 at 7:54 am #154684
    kemlow
    Participant

    kemlow wrote:Thank you very much i will try this at the weekend

    good morning
    i tried to reset this by turning it off and pressing the button 4 times but nothing happend it is a diffrent model to the one that you sent me to

    November 21, 2005 at 9:15 am #154685
    Dave_Conway
    Participant

    Re: diplomat dishwasher not working

    The reset procedure is the same for both models. I think it may be engineer time then in all honesty.

    Try Repairs@ for one 🙂

    Dave.

    March 14, 2008 at 9:34 am #154686
    alfsdad
    Participant

    Re: diplomat dishwasher not working

    Hello, Thanks for this information. My ADP 8132 had a fault of running for a few minutes, then stopping.

    It would rinse fine, but anything else would not process.

    You do have to be quick on the buttons though! 😯
    😛 Great help I am now listening to a happy dishwasher, and an even happier bank balance 🙂

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.