Diplomat ADP8242 won’t switch off after completing cycle

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP8242 won’t switch off after completing cycle

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 20, 2005 at 1:24 am #13432
    voz
    Participant

    Hi – my Diplomat ADP 8242 will not auto power off after having completed a cycle. The dishes are cleaned, the water drains and the filters are clean.

    However, the machine continues to whirr away all night whereas usually the program would finish within 90 mins.

    Will a reset solve this or should I call out an engineer?

    November 20, 2005 at 2:21 pm #154838
    Dave_Conway
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    You could try the reset procedure, if that fails then I would suggest an engineer to be honest. Repairs@ should provide one 🙂

    The reset procedure can be found by doing a forum search for “diplomat and reset”

    Dave.

    November 20, 2005 at 8:23 pm #154839
    voz
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    Thanks Dave – have tried the Reset routine but just can’t get the 2 outer lights to illuminate…is there anything I should know/do different?

    Thanks

    November 20, 2005 at 9:27 pm #154840
    Dave_Conway
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    I think there may be an underlying cause in that case, engineer time to be honest voz 😉

    Dave.

    November 26, 2005 at 12:47 am #154841
    voz
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    Hi Dave – I have tried using Repairs @ but to no avail. Two engineers listed in the Bristol area but neither has come back to me…any suggestions pls?

    November 26, 2005 at 12:58 am #154842
    Penguin45
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    Don’t panic – Dave’s got a little list…….

    Bristol is a little hole in our coverage at the moment.

    Penguin45.

    November 26, 2005 at 6:20 pm #154843
    Dave_Conway
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    voz wrote:Hi Dave – I have tried using Repairs @ but to no avail. Two engineers listed in the Bristol area but neither has come back to me…any suggestions pls?

    Would you mind forwarding the details to my email address please as anyone listed in repairs@ should resond to you promptly once you submit your details.

    I can help with a recommendation if you would pop up the BS?? number..

    Thanks.

    Dave.

    November 26, 2005 at 8:09 pm #154844
    voz
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    Hi – having probs with my email.

    I live in the BS16 area of Bristol. The two engineers I’ve tried to contact are Concept Service Ltd and Safe & Sound.

    Hope that helps.

    Cheers,

    November 26, 2005 at 10:32 pm #154845
    Dave_Conway
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    If you’re having problems with your email that may be the reason why, both companies may have sent one and are waiting for a reply.

    Concept Service are on 0870 209 0040

    Safe and Sound are on 0117 939 5885

    Hope this helps 😀

    Dave.

    November 27, 2005 at 9:35 pm #154846
    voz
    Participant

    Re: Diplomat ADP8242 won’t switch off after completing cycle

    Hi – email back up now but none received from the companies. Will call the numbers tomorrow.

    Thanks for your help
    V

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.