Fisher + Paykel Smartdrive 058

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher + Paykel Smartdrive 058

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 21, 2005 at 12:39 pm #13457
    brendanh
    Participant

    Hi. I have a f isher and payket smartdrive 058. During washing, it stops approximately every three minutes and beeps. This happens during fill up, regular washing and also rinse.
    The error codes are as follows:

    0: 00000000
    1: 00000000
    2: 00000000
    3: 00000000
    4: 00000100
    5: 10100010
    6: 00000001
    7: 00000011
    8: 00011010
    9: 01010110
    A: 00000010
    B: 11111111
    C: Flashes between 00101101 and 00101110
    D: 00100011
    E: 10000110
    F: 00011000

    Thanks in advance if anyone can help me.

    November 22, 2005 at 12:25 am #155024
    Penguin45
    Participant

    Re: Fisher + Paykel Smartdrive 058

    They all point to a motor control problem caused by the electronic board.

    Regards,
    Penguin45.

    November 24, 2005 at 6:31 am #155025
    KiwiwantsworkinCanada
    Participant

    Re: Fisher + Paykel Smartdrive 058

    Please post only the light sequence which relates to the hold and spin lights, it make our job so much easier. Dont press advance before spin up, as this is for earlier models only. 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.