Built in test programs

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Built in test programs

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 21, 2005 at 7:06 pm #13470
    DentedPorsche
    Participant

    Hiyas,
    Quite a lot of appliances have test programs that can be run.
    I’ve already posted the details on how to run the Whirlpool dolphin dishwasher range test program, along with the error codes.
    Anyone know of other test programs for other appliances that may be helpful in diagnosing faults?

    Brian

    November 23, 2005 at 2:10 pm #155064
    Phidom
    Participant

    Re: Built in test programs

    Hotpoint Ultima WM71-73 there is a spin test and a wet test. For spin test hold A & D keys down and press the On button then the start key. Wet test hold A & C down etc.

    November 23, 2005 at 4:40 pm #155065
    iadom
    Moderator

    Re: Built in test programs

    Phidom wrote:Hotpoint Ultima WM71-73 there is a spin test and a wet test. For spin test hold A & D keys down and press the On button then the start key. Wet test hold A & C down etc.

    Just to add a bit of flesh to the bones. 😉

    After doing the above the display will first show ’50°- Wet Test’.

    Test sequence is as follows.
    1. Fill cold for 40 secs no motor action
    2. Temp controlled filled to 50° with normal agitation at wash speed
    3. Pause for 20 secs
    4. Fill from fabric cond valve
    5. Four tumbles of normal action at wash speed
    6. Pump out for 40 secs, no agitation
    7. Pump out and spin at 1000 rpm for 30 secs
    8. Pump out and spin at 1200 rpm for 10 secs
    10 Stop.

    Important notice.

    Allow the test programme to finish before switching off the appliance.
    Failure to do this will result in the sequence running when the customer next tries to select a programme.
    Pressing Cancel will also clear the test programme.

    This will also work on Ulitma Washer Dryers such as WD71/3

    When I get the time I will post a few more Hotpoint test programmes, but once again the squash court beckons. 🙂

    August 8, 2006 at 2:30 pm #155066
    DDSDDS
    Participant

    Re: Built in test programs

    any one else got any more this is just as helpful as the error codes list
    i have the most common ones in a file i take with me i call it my bible 😉

    August 8, 2006 at 3:41 pm #155067
    cab
    Participant

    Re: Built in test programs

    Hi have you got the Zanussi style. And the Tricity/Electrolux or LG, can help if not.

    cab 😀

    August 8, 2006 at 3:46 pm #155068
    kwatt
    Keymaster

    I think it may be time for a specific thread for this similar to the fault code one.

    K.

    August 8, 2006 at 3:51 pm #155069
    cab
    Participant

    Re: Built in test programs

    is there one at the moment?

    cab

    August 8, 2006 at 4:03 pm #155070
    iadom
    Moderator

    Re: Built in test programs

    “Cough” http://tinyurl.com/grx3f

    August 8, 2006 at 4:05 pm #155071
    iadom
    Moderator

    kwatt wrote:I think it may be time for a specific thread for this similar to the fault code one.

    K.

    In fact you started it ken, 😛 😆

    August 8, 2006 at 4:13 pm #155072
    kwatt
    Keymaster

    😳

    K.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.