hpt wma63

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hpt wma63

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 27, 2005 at 7:22 pm #13625
    dopper
    Participant

    changed a drum on a wma63 and a plug came of the power board.its a digi display sml board not the long board
    the plug which is off can go in 2 places on the board. its a white plug 2 wires black and blue it goes on 1×6 or 1×11 anyone help with which one
    cheers paul

    November 27, 2005 at 7:31 pm #155735
    Martin
    Participant

    Re: hpt wma63

    Look very closely Paul as there are always scratch marks on the PCB terminals where it was located. A magnifying glass is a useful tool in a case like this and for spotting dry joints also 😉

    November 27, 2005 at 7:55 pm #155736
    iadom
    Moderator

    Re: hpt wma63

    Not easy to see in the manual, so even though it is a Sunday night, I have opened my toolbox and dragged my own WMA63 out and had a look.

    plug with Black/Blue goes onto 1×11 . 🙂

    November 27, 2005 at 9:07 pm #155737
    dopper
    Participant

    Re: hpt wma63

    cheers

    November 27, 2005 at 10:59 pm #155738
    iadom
    Moderator

    Re: hpt wma63

    No problem, the control board is the same size as the non Ultima machines BTW,

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.