Cookers Appliances Dual Zone Oven & Grill model 605403

Home › Forums › Public Support Forums › Spare Parts Help › Cookers Appliances Dual Zone Oven & Grill model 605403

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 29, 2005 at 1:34 am #13668
    Viv
    Participant

    Hi
    Just found this useful site and hope that you can help me.
    I have a Cookers Appliances Oven & Grill as per subject title.
    The serial numbers inside the oven are:
    Mod. 05-605403/1 Typ B15E
    SNr. 02 11 10079 -O846CK131 230…240V ~50Hz 4.170kW max

    Around 10 months ago the lcd timer/clock stopped working with the timer alarm going off at regular intervals. The oven and grill still worked so we just turned the power off at the wall when we didn’t need the oven as the house builders/oven installers seemed unable to help with the problem (apparently it was just out of warranty).
    Recently however, the oven has stopped working – I assume the heater element needs replacing as the oven fan still operates. Also, the oven bulb failed a few months ago, but I have been unable to source a replacement (15w small edison screw) bulb which is small enought to fit and allow the glass bulb cover to be replaced (the oven bulbs in B&Q, etc are just too big).

    I would be grateful if you would advise primarily on a replacement for the heater element but also, if possible, on a bulb replacement and an lcd timer/clock unit.
    Thanks in advance.

    November 29, 2005 at 9:37 am #156067
    Dave_Conway
    Participant

    Re: Cookers Appliances Dual Zone Oven & Grill model 6054

    Hi,

    The lamp is here

    And the element here

    I’ll make sure it’s one of the “tiny” ones (lamp).

    The timer is part number 78X2893 at £69 inc VAT which I can get for you (special order), drop me an email if you would like that to spares@ukwhitegoods.co.uk 🙂

    Dave.

    November 29, 2005 at 7:51 pm #156068
    Viv
    Participant

    Re: Cookers Appliances Dual Zone Oven & Grill model 6054

    Thanks for your prompt reply, you’re a life saver (well a money saver, at least 😆 ); we’ve been let down a few times now by people who were supposed to be coming to have a look/fix the oven. I’ve ordered the bulb and element now.

    Is the timer/clock easy to fit? Does it involve any soldering etc?
    If it’s relatively easy to fit, I’ll email you about the order.

    Thanks for your help.

    November 29, 2005 at 8:27 pm #156069
    Dave_Conway
    Participant

    Re: Cookers Appliances Dual Zone Oven & Grill model 6054

    Viv wrote:Is the timer/clock easy to fit? Does it involve any soldering etc?
    If it’s relatively easy to fit, I’ll email you about the order.

    Not too bad really if you’re electrically/mechanically competent. You’ll probably be able to tell when replacing the element, but it doesn’t involve soldering 🙂

    Please remember to disconnect from the power when working on the oven :zap:

    Dave.

    November 29, 2005 at 11:39 pm #156070
    Viv
    Participant

    Re: Cookers Appliances Dual Zone Oven & Grill model 6054

    Dave_Conway wrote:
    Please remember to disconnect from the power when working on the oven :zap:

    Ah, that’s something to remember! 😆

    I’ll see how I go with the element. If all goes well, I’ll email you re the timer.
    Thanks again.
    🙂

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.