Filter Blocked error on Hotpoint FDW60G 1 – But it is not

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Filter Blocked error on Hotpoint FDW60G 1 – But it is not

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 29, 2005 at 8:44 pm #13691
    Hadley
    Participant

    Hi,
    does anyone have any idea as to what could cause my Hotpoint FDW60G 1
    to be doing this?
    The filter is not blocked but i cannot use the machine, all it does is fill it up a bit, then it gets the filter blocked error and drains it again, thats it!
    TIA for any ideas 😀

    November 29, 2005 at 8:50 pm #156158
    technics1200
    Participant

    Re: Filter Blocked error on Hotpoint FDW60G 1 – But it is no

    At a guess, have you checked how low the waste-hose is down the standpipe? or is it connected directly to the sink waste? as a former hotpont engineer, was a common problem (im assuming its a new appliance) but i have not worked on this model.

    Regards.


    P.s. Power off (plug out of mains socket) before ANY checks please.. :zap:

    November 29, 2005 at 8:59 pm #156159
    Hadley
    Participant

    Re: Filter Blocked error on Hotpoint FDW60G 1 – But it is no

    Hi,
    thanks for such a fast reply,
    it is brand new and is plumbed into the sink drainage, it is a replacement one so just put back as the last one was.
    Looks like it’s going to have to be a phone call tomorrow and engineer out then 🙁

    December 21, 2005 at 11:45 pm #156160
    chewitt
    Participant

    Re: Filter Blocked error on Hotpoint FDW60G 1 – But it is no

    im having the same problem with my fdw60g,however the lights that flash are 4 and 6 which is not shown in the manual.i have cleaned the drainage and checked the inlet. any ideas anyone??

    December 21, 2005 at 11:52 pm #156161
    Dave_Conway
    Participant

    Re: Filter Blocked error on Hotpoint FDW60G 1 – But it is no

    4 and 6 are a heating problem chewitt which could be down to one of a few component failures I’m afraid.

    Engineer time to be honest, check the repairs@ link below 😀

    Dave.

    December 22, 2005 at 6:42 pm #156162
    chewitt
    Participant

    Re: Filter Blocked error on Hotpoint FDW60G 1 – But it is no

    thanks for the post dave,phoned hotpoint this morning at 10 o’clock and had an engineer with me by 1pm!!! 8O. it was a heater element fault and he’s put a new one in.best sevice i’ve ever had from any company 🙂 thanks again for the help

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.