DWF70 error codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DWF70 error codes

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 3, 2005 at 11:38 am #13778
    Tubs
    Participant

    Searched error code list no joy 😥

    Need error code and test routine for above appliance please?

    Have AL10

    thanks Steve

    December 3, 2005 at 12:14 pm #156562
    Dave_Conway
    Participant

    Re: DWF70 error codes

    Newer Hotpoint, Creda, Ariston and Indesit Dishwashers:

    AL01 – Anti flood switch operated
    AL02 – Valve or connections
    AL03 – Time out – drain
    AL04 – Thermistor (module)
    AL05 – Circulation pump
    AL06 – Time out – fill
    AL07 – Not used
    AL08 – Time out – heat
    AL09 – Software recogntion error
    AL10 – Heating circuit
    AL99 – Communications error – connectors, cables etc.
    H20 – Time out – fill (taps)

    Not sure about the test sequence though 🙁

    Dave.

    December 3, 2005 at 1:12 pm #156563
    Tubs
    Participant

    Re: DWF70 error codes

    Thanks Dave :tup:

    Are these buggers easy to get apart or is it the Bosch scenario :rotfl:

    December 3, 2005 at 6:05 pm #156564
    johnnyj
    Participant

    Re: DWF70 error codes

    P*** easy to replace heater six screws in base gives you access remember to tip appliance on the left hand side looking from the front as you will flood the pressure system 2 big jubilee clips to replace the cr@ppy factory fitted ones and your home and dry.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.