- This topic has 5 replies, 2 voices, and was last updated 20 years, 4 months ago by
.
-
Posts
-
Fills and emptys 3 times with no wash and then 4 red lights flash and 10 audable sounds please can anyone tell me what the fault is .Thankyou.
Re: Smeg D/W Fault codes? Model dwf64sse
Sorry this is the model no. of the smeg dw with flashing lights. Thank you.
Re: Smeg D/W Fault codes?
Uhm, OK.
The model number should start with DWI, DWD or DWF or similar.
A typical example would be DWF64SS.
Failing that, are there four or five lights on the PCB display?
Re: Smeg D/W Fault codes?
Numbering the lights 1-5 from left to right:
If I can assume that it’s 1,2 + 3 on and 5 flashing then the machine is displaying E7 – defective turbine functioning
This alarm is generated when the timer card does not detect the signal comig from the turbine.
This defect can caused by:
– defective turbine
– turbine electric connections wet
– electric connections are not properly connected
– defective electric cardI would suggest attempting to reset the board first, though, as a spike in the supply current could have tripped it. The reset procedure has been posted several times previously; try searching for Smeg AND Reset in the forum search feature
HTH
- You must be logged in to reply to this topic.