De Dietrich ckr hood PCB Fuses Part No’s??

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › De Dietrich ckr hood PCB Fuses Part No’s??

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 5, 2005 at 9:55 pm #13845
    TELL
    Participant

    Hi Dave,
    back again. I’m after the part No’s, for the main pcb safety fuse’s for the de dietrich ckr hood. mod dhd170xui or 1. it’s rating is 250mA 240v two together on the board.
    tested components etc, nowt down to earth, can you tell me if the is a reason on these m/c’s to do this?. i.e. surge resistors not working etc. can’t see any reason other that that??.
    ta TELL..

    December 5, 2005 at 10:42 pm #156929
    Dave_Conway
    Participant

    Re: De Dietrich ckr hood PCB Fuses Part No’s??

    This is the same model as yesterday isn’t it ?

    Only the whole PCB shown Tell, part number 77X9211 @ circa £100 ex VAT trade from Connect 😯

    You can probably source the components from RS or similar I expect 🙂

    Dave.

    December 5, 2005 at 11:38 pm #156930
    TELL
    Participant

    Re: De Dietrich ckr hood PCB Fuses Part No’s??

    same one dave, will try tandy or somebody like that.
    Ta TELL..

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.