Siemens dish washer Lady 45

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens dish washer Lady 45

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 10, 2005 at 5:26 pm #13964
    Dragan
    Participant

    This “old lady” seems to be tired of washing.She stops few times during washing / tank is empty /.All valves and microswitches of water level and aqua stop are correct.
    I have not Service Manual or diagrams.How many “stop” position has this timer?Any idea about this problem?
    ENr:SR13230/00,FD 6910

    Dragan

    December 10, 2005 at 6:03 pm #157333
    Penguin45
    Participant

    Re: Siemens dish washer Lady 45

    There were two standard faults on this range, Dragan. One was the wiring breaking in the door where it pivots. The other was the softener unit solidifying and not allowing the tank to drain into the machine quickly enough.

    If the tank is not refilling, have you checked the float/switch set-up in the fill matrix? This jams occasionally.

    If this is the same basic machine as the UK ones, there are 2 stop positions – one at the end of the pre-wash and one at the end of the main programme.

    HTH,
    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.