Hotpoint WM62

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WM62

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 11, 2005 at 10:52 am #13984
    robbra
    Participant

    I have to change the old GEC motor for the new type but no wiring instructions for the new connector. Is it wire for wire or can anyone help if its more complex?
    Thanks
    Rob

    December 11, 2005 at 12:15 pm #157392
    Dave_Conway
    Participant

    Re: Hotpoint WM62

    http://www.ukwhitegoods.co.uk/modules.p … pic&t=9900

    That should help 🙂

    Dave.

    December 11, 2005 at 3:12 pm #157393
    mike412
    Participant

    Re: Hotpoint WM62

    I have the wiring diagram which comes with the motor if Daves post doesnt solve the problem. Can fax if needed. Just PM me.
    Mike

    December 11, 2005 at 7:49 pm #157394
    robbra
    Participant

    Re: Hotpoint WM62

    Thanks for the help. Not done one before.
    Rob
    Rob

    December 12, 2005 at 5:35 pm #157395
    robbra
    Participant

    Re: Hotpoint WM62

    Thanks for the fax Mike.
    Just one thing….on fitting the motor it seems to rotate faster on the wash speed….any thoughts?
    Rob

    December 12, 2005 at 5:53 pm #157396
    pen0668
    Participant

    Re: Hotpoint WM62

    have you fitted the correct motor as there are analoge/didgital motors wrong ones cause problems ??

    December 12, 2005 at 10:21 pm #157397
    SDR
    Participant

    Re: Hotpoint WM62

    you need a 1604822 motor not a 1604812 hope this helps

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.