zanussi fx1465w prod 914792705100

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi fx1465w prod 914792705100

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • December 20, 2005 at 5:28 pm #14192
    barryfast
    Participant

    door locks machine bleeps and will not start.

    December 20, 2005 at 7:13 pm #158515
    eastlmark
    Moderator

    Re: zanussi fx1465w prod 914792705100

    any flashing lights? error codes?

    December 20, 2005 at 10:54 pm #158516
    squadman
    Participant

    Re: zanussi fx1465w prod 914792705100

    Had one like this last week, interlock turned out to be culprit. Check blue wiring loom between facia panel and pcb as well.

    8)

    December 21, 2005 at 8:32 am #158517
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    hi squadman thanks for the tip , will confirm 😀

    December 21, 2005 at 1:24 pm #158518
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    TRIED DOOR SWITCH STILL NO GO ??? 😡
    BARRY

    December 21, 2005 at 4:52 pm #158519
    farmboy
    Participant

    Re: zanussi fx1465w prod 914792705100

    You need to go into the diagnostic program and check the last error code.

    December 27, 2005 at 4:28 pm #158520
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    HI CAN YOU HELP WITH CODES BARRYFAST THANKS WESTWALES ❓

    December 29, 2005 at 2:36 pm #158521
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    farmboy wrote:You need to go into the diagnostic program and check the last error code.

    ❓ HI PLEASE CAN YOU HELP WITH THE CODES THANKS BARRY WEST WALES

    December 29, 2005 at 3:01 pm #158522
    Dave_Conway
    Participant

    Re: zanussi fx1465w prod 914792705100

    Are you on Broadband Barryfast ?

    I can send the info by email but it’s 4.5mb ! 😯

    Dave.

    December 29, 2005 at 5:17 pm #158523
    Bernie
    Participant

    Re: zanussi fx1465w prod 914792705100

    Did you find the fault as I have same one.

    Select any program and push start, door locks pump runs for one/two seconds then nonthing until turning program dial off and back on then the same happens.

    I have just got a copy of the diagnostics manual so have got to go back to this one after the new year.

    Any help appreciated
    Bernie

    January 2, 2006 at 12:34 pm #158524
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    Hi Dave yes please, got broadband for info barryfast thanks

    January 2, 2006 at 12:41 pm #158525
    barryfast
    Participant

    Re: zanussi fx1465w prod 914792705100

    Dave_Conway wrote:Are you on Broadband Barryfast ?

    I can send the info by email but it’s 4.5mb ! 😯

    Dave. Hi yes please Dave thanks barryfast

    January 2, 2006 at 12:46 pm #158526
    Dave_Conway
    Participant

    Re: zanussi fx1465w prod 914792705100

    OK, I’ll send it in a few minutes 🙂

    I’ve deleted your other single post, please keep related topics in one place 😉

    Dave.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.