- This topic has 5 replies, 3 voices, and was last updated 20 years, 3 months ago by
.
-
Posts
-
Fought my way through the ice and snow to this machine -not filling. It resets the programme ok, pumps out ok but when it gets to the filling it goes dead. There is no supply to the anti flood device (at the machine end.) Float switch all seems ok. I suspect the module but is there anything I may have missed?.
Thanks in anticipation,
Happy New Year one and all.
Mike.Re: Bosch SHV4313GB/17 Dishwasher
Dry joints on the module is the favourite for these for all manner of odd faults Mike 😉
Dave.
Re: Bosch SHV4313GB/17 Dishwasher
Mike,
Have you got power to the inlet/safety valve under the sink and has its water block device tripped?
Re: Bosch SHV4313GB/17 Dishwasher
Martin.. Thanks for your post.
There was no mains supply at the machine end of the inlet hose so I did not dismantle this any further. The customer indicated that he had had problems with the aquastop valve in the past but had cured it himself. I depressurised the inlet hose but no difference.
regards,
Mike.Re: Bosch SHV4313GB/17 Dishwasher
Went back to this job today, Yes its the module- nice little burn up in the corner by the connector block. Needs a new module and connector. Customer decided to buy new d/w, so didnt persue any further. Now that the customer has seen price of new machine he has decided to have repaired after all. Has anyone seen this fault before?. Is this a straightforward module replacement or are we looking at shorts elsewhere on the machine?.
Grateful of any advice/assistance.
Regards,
Mike.
- You must be logged in to reply to this topic.