Beko wma1614W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko wma1614W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 3, 2006 at 5:24 pm #14479
    robbra
    Participant

    Wont spin, just about reaches didtribute for 10 seconds then stops and if setting timer for a wash it takes water for 3 seconds then timer advances to halfway between prog 4 and rinses. I suspect the module but ain’t too sure.
    Help!!
    Rob

    January 3, 2006 at 6:30 pm #159606
    Washman
    Participant

    Re: Beko wma1614W

    Hi

    The timer on this model advances to correct position after start ( see page 9 of user manual under Start section ).When knob set to a wash the module controls the wash not the timer, by selecting 1/2/3or 4 you are telling module the wash that you want , so that may be working OK . Check the pressure switch is working correctly, have been to a few with faulty pressure switches.

    Mike

    January 3, 2006 at 11:38 pm #159607
    robbra
    Participant

    Re: Beko wma1614W

    Hi Washman,
    Pressure switch fine, first thing I checked but I do these all the time but never had the timer advance like this so a bit in the dark. Will order module for now.Thanks
    Rob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.