Whirlpool adpw2 – wet but dry!!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool adpw2 – wet but dry!!

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 4, 2006 at 9:24 pm #14531
    Nesbituk
    Participant

    Hi, I have a ADPW2 which until around 1 week ago was cleaning ok.
    Now, it does not clean properly and the tablet seems to be only half dissolved. Sometimes when opening the door at the end of the cycle you hear the tablet door open and then the tablet drops out not used.

    I’ve cleaned the spinners, filter etc but not sure what else to look for?

    If I hold the start button in when turning on then the LED flashes – not sure if that us relevent or not.

    The product code is 845 937 15710
    Any ideas most appreciated.
    Thanks
    Chris

    UPDATE – just put a cloth in the top draw. Turned on and waited around 15 mins. Opened up and the cloth is bone dry but there is water in the bottom. Looks like the bottom arm was trying to move but couldnt. Its unblocked and free to move…….puzzled!

    January 4, 2006 at 10:24 pm #159786
    Dave_Conway
    Participant

    Re: Whirlpool adpw2 – wet but dry!!

    Circulation motor either faulty or blocked by the sound of it then.

    Not a job for the fainthearted 😉

    Check the repairs@ link below 🙂

    If you do decide to delve in, please ensure power is off :zap:

    Dave.

    January 6, 2006 at 3:51 pm #159787
    Nesbituk
    Participant

    Re: Whirlpool adpw2 – wet but dry!!

    Thanks – I think I had better make a phone call!!

    January 12, 2006 at 1:36 pm #159788
    Curly
    Participant

    Re: Whirlpool adpw2 – wet but dry!!

    Check that the double connector that supplies water to the top spray arm
    has not come out of the filter, this has been a problem, and the part is only a few quid.
    Curly

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.