Bendix Was M/c BIW126 PNC91479252500 Flashing Lights

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bendix Was M/c BIW126 PNC91479252500 Flashing Lights

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 5, 2006 at 6:49 pm #14565
    laurenceuk
    Participant

    Hi,

    The various indicator lights on this machine go out intermittently and machine cuts out then lights come on, machine starts, lights go out and so it goes on.

    The lights can be out or on for different time spells and sometimes the `end` light comes on and it may beep once or it may give a continuous beep. There is no pattern.

    I have checked all other compenents and they are good. I have had the board out but no physical damage. put back and still the same. I am suspecting the board nevertheless. These boards are £117 ex vat., EMW don`t do one. 🙁

    Can these boards lose there programme, if so can they be reset or reprogrammed? Is there likely another cause?

    Thanks,

    Laurence

    January 6, 2006 at 9:39 pm #159919
    maltheviking
    Participant

    Re: Bendix Was M/c BIW126 PNC91479252500 Flashing Lights

    The symptoms suggest an obvious break in the power supply. I presume you have started at the begining 13 socket/plug?,then work your way through mains cable, supressor etc, finally to the board. If all ok then check the board for a dry joint etc, check the “dropper resistor” for burning or open circuit . Good luck

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.