Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › indesit w123 uk bg
- This topic has 12 replies, 4 voices, and was last updated 20 years, 3 months ago by
claire1325.
-
AuthorPosts
-
January 6, 2006 at 10:27 pm #14598
claire1325
Participanthi my machine is not working it starts to fill up then turns its self of and the programn dial cotinously goes around without stopping there is no blockage in the filter have you any idea what it is and how much it might cost
January 6, 2006 at 11:57 pm #160066eastlmark
ModeratorRe: indesit w123 uk bg
You need to count how many times the light is flashing between pauses as the knob is clicking. This should give us some information as to what the problem is. If you have checked the filter then you probably have done as much as you can without proffesional help.
January 7, 2006 at 10:54 am #160067claire1325
ParticipantRe: indesit w123 uk bg
hi the machine comes on, light flashes then goes off and the dial just keeps clicking around
January 7, 2006 at 11:24 am #160068Dave_Conway
ParticipantRe: indesit w123 uk bg
Does that mean that it only flashes once then stays off or it flashes once, goes off then flashes once again etc ?
Dave.
January 7, 2006 at 1:14 pm #160069claire1325
ParticipantRe: indesit w123 uk bg
hi it only flashes once then stays off only the dial goes around do you think it could be a pump fault thanks
January 7, 2006 at 1:17 pm #160070claire1325
ParticipantRe: indesit w123 uk bg
also starts to fill then goes of no light just clicking it did stop draining about 2 days before but was still washing ok but now nothing
January 7, 2006 at 1:31 pm #160071Dave_Conway
ParticipantRe: indesit w123 uk bg
That’s bit odd, the light should flash/pause/flash in sequence.
Assuming the normal checks have been done (filter cleaned, water supply ok and hoses not kinked etc) I think it’s time for an engineer to be honest.
Check the repairs@ link below 🙂
Dave.
January 8, 2006 at 7:21 pm #160072claire1325
ParticipantRe: indesit w123 uk bg
hi just to add that i have just counted 10 flashes it starts to pump water in for about 15 to 20 seconds then the light goes out and starts to flash about 10 times any thoughts on the fault thanks
January 8, 2006 at 7:58 pm #160073Penguin45
ParticipantRe: indesit w123 uk bg
If the count is 10, you have a problem with the water level control system. The level switch needs checking for function, the air hose for blockages or leaks.
Power off if doing this yourself.
Regards,
Penguin45.January 8, 2006 at 8:07 pm #160074claire1325
ParticipantRe: indesit w123 uk bg
hi i know it sounds stupid but where abouts is the level switch and air hose so i can tell my hubby any websites that give you pictures many thanks
January 8, 2006 at 8:47 pm #160075claire1325
ParticipantRe: indesit w123 uk bg
washing is stacking up now four kids to wash for any help appreciated
January 9, 2006 at 12:33 am #160076Penguin45
ParticipantRe: indesit w123 uk bg
Claire – we cannot, for a variety of reasons give you a detailed, blow by blow account of how to repair your appliance. We can only offer you some guidance and hope you can use the information.
If you are not sure how to interpret our help, please get pro assistance. You can click the link below for a UKW engineer in your area.
Regards,
Penguin45.January 10, 2006 at 4:52 pm #160077claire1325
ParticipantRe: indesit w123 uk bg
hi just to let you know repair man has been and put a new pump in everything working fine thjank you for your help 🙂
-
AuthorPosts
- You must be logged in to reply to this topic.
