- This topic has 14 replies, 5 voices, and was last updated 20 years, 3 months ago by
.
-
Posts
-
Hi all,
Further to a previous discussion on the float type water level control in this machine,I have already visited a customer with the overfill prob, cleaned and refitted float (clear end down as found),then get recall for same fault. So checked again, all still clean. Float or reed switch? Or both? Both costly-and someone said there was a mod to combat overfilling? Retro fit or manufacturer only? Is it a common fault?
If you can shed any light on this subject -much apprieciated!!Thought for the day- Thank your lucky stars these domestic appliance manufacturers don’t make life-support machines.
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
Hya aqua
Module has a software change p/no 489494 to combat thisGreg
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
just fitted a new pcb to one of these…worked a treat…
nice info came with part…how to config pcb & how to by-pass pump relay if fitted …kept the leaflets if anyone wants a butchers…orig fault = anti flood condition…wouldnt fill
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
You guys are fitting the revised overfill mushroom aswell as the new pcb aren’t you ❓
Sorry but new part no. escapes me at the moment 😳
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
Mushroom Float Kit – 489542
PCB Module – 489494New part numbers for both 😉
Greg
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
Mushroom Float,cant miss it l/h side of filter in base sorta round and mushroomy shaped 🙄
Greg 😉
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
not on the model i repaired dude….just a ball standard bit of poly and micro-switch,,,yet to see mushroom…
are they magic one,s ???
cheers f/bRe: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
Well the model you saw is definately not the one in discussion here,, because I can definatly tell you that it has the said mushroom over fill float assembly. Check your model and get back to us.
Cheers dude
Greg
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
will do ..if its any help the base comes off via 2x torxs screws, and has a small pcb type board clipped to sump area
model no in van but it looks a bit to frosty out their right now…
f/bRe: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
The mushroom in question is on the inside of the dishwasher, just next to the lower spray arm support. Think only the very early ones need modding by now.
Just another point of coding these modules, the ones with selector knobs I mean, the coding leaflet lists position 1, 2, 3, 4, etc. These refer to the knob posiiton as shown in the leaflet not those marked on the knob or facia. The knob actually turns past the numbered programmes. so dont get caught out, might end up with some odd programmes in the wrong places.Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
yeh your right..the leaflet you get is not very good as it has been photocopied many times by the looks of it…the only prob i had was that i pushed control knob back on to the wrong pos…soon notied mistake but could lead to confusios state if not spotted quick..
leaflet also mentions to by-pass pump relay in base (certain models)leaflet does mention this modified pcb will sort overfill probs
💡 ❓
Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!
funkyboogy wrote:
leaflet does mention this modified pcb will sort overfill probs
💡 ❓
Would not be in their interest to admit that. Bosch are not alone software problems.
For arguaments sake lets call it a software update 😉Greg
- You must be logged in to reply to this topic.