BOSCH WFF2000UK – Programmer –only works ‘manually’

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › BOSCH WFF2000UK – Programmer –only works ‘manually’

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 12, 2006 at 9:59 am #14743
    henryhiggins
    Participant

    family member announces she has been ‘doing it manually’ for a year or so !

    i.e. the programmer does not move on to the next part of the programme unless she does it by hand.

    Any clue apart from buy new programmer ?

    January 12, 2006 at 11:16 am #160664
    Dave_Conway
    Participant

    Re: BOSCH WFF2000 Programmer –only works ‘manually’

    It depends if it sticks literally everywhere, other components can cause a timer to stick.

    If it’s not advancing in any position (even on a spin only) then it may be.

    Full model beginning Enr…. to identify further please.

    Dave.

    January 12, 2006 at 12:32 pm #160665
    henryhiggins
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    thanks dave – ENR WFF 2000GB / 14FD7712 02949

    After more intensive interrogation – it only sticks on the ‘main wash’ – it moves on normally in the other ares eg. spin

    🙄

    January 12, 2006 at 1:13 pm #160666
    superfix
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    Could be an o/c heater or inlet valve causing the problem.

    Power off if you have look.

    January 12, 2006 at 1:18 pm #160667
    Dave_Conway
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    In that case I would check the heater 😉

    Power off please if checking yourself or if you need an engineer, check the repairs@ link below 🙂

    Dave.

    January 12, 2006 at 2:03 pm #160668
    henryhiggins
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    Thanks chaps – i can see the logic – back tomorrow after practical intervention at house of machine !

    What a luvly lot you are – – –

    🙂 ❗

    January 13, 2006 at 11:12 pm #160669
    gegsy
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    More than likely heater p/no 263726

    Greg

    January 14, 2006 at 12:40 am #160670
    Penguin45
    Participant

    Re: BOSCH WFF2000UK – Programmer –only works ‘manually’

    Especially if it stops at the teeny weeny blue dot on the programme indicator dial………..

    Penguin45.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.