Beko WMB120W bearing change

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB120W bearing change

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 13, 2006 at 12:31 pm #14796
    Seamy
    Participant

    I’ve been to look at a Beko WMB10W washing machine, it needs drum bearings replaced, had been quite noisey for a while, there is a lot of play in drum, up & down & forward & back. belt had come off. Are these worth repairing & is it a complete tub removal, is it out the top job or out front ?

    What kinda figure would i need to quote, i know they are around £200 to buy.

    January 13, 2006 at 12:43 pm #160835
    Dave_Conway
    Participant

    Re: Beko WMB120W bearing change

    It’s a front off the tub job (Hpt 95 sort of thing) so if the front cabinet won’t remove it’s a tub out job.

    Inner drum about £55 ex VAT trade if the spider is damaged 🙁

    Dave.

    January 16, 2006 at 10:54 am #160836
    Seamy
    Participant

    Re: Beko WMB120W bearing change

    Thanks Dave, you don’t have a part number for bearing kit? Not listed on Mediator.

    January 16, 2006 at 11:12 am #160837
    Dave_Conway
    Participant

    Re: Beko WMB120W bearing change

    There is no kit Seamy, you’ll need to order the bearing seal then knock the bearings out to get the sizes. More than likely a 6206 and a 6205 I would think.

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.