Bosch WFLi2440 is it flat on the back or do bits stick out

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch WFLi2440 is it flat on the back or do bits stick out

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 17, 2006 at 2:41 pm #14893
    jbs
    Participant

    We would like to buy a replacement integrated washer to our MFI unit that broke a few days ago. This has proved much harder then we expected because the MFI unit was only 820mm x 537mm x 600mm and many integrated units are bigger.

    We’ve identifed the Bosch WFLI2440 integrated washer as one we would like but it is 820mm x 577mm x 595mm. The extra 40 mm of depth could be an issue for us as we have the waste pipe from our sink running behind the washer and the old MFI washer only just fitted.

    However if the Bosch WFLI2440 only has one bit which sticks out to 577mm we might be able to fit it in.

    Does anyone know exact back dimensions of the Bosch or is it all exactly the same depth across the back?

    thanks

    jbs

    January 17, 2006 at 4:05 pm #161199
    don
    Moderator

    Re: Bosch WFLi2440 is it flat on the back or do bits stick

    Hi jbs

    Looking at the technical diagram it would appear that it has a flat back with a measurement of 574mm deep. However there is a cut out for skirting board use which is a max of 180mm high but the drawing is not clear as to its depth. This might help with the sink waste problem. Bosch have a product advice line which may be able to assist you further. They can be reached on 08702 400060.

    HTH
    Don

    January 17, 2006 at 5:33 pm #161200
    jbs
    Participant

    Re: Bosch WFLi2440 is it flat on the back or do bits stick

    thanks Don, we’ll give them a call tomorrow. jbs

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.