Electrolux ESl 424 slight leak

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Electrolux ESl 424 slight leak

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 18, 2006 at 1:37 pm #14925
    imck
    Participant

    I have recently fixed my dishwasher with help from this forum. Thanks!
    It involved removing the sump assy and giving it a good clean.

    I have re-assembled but have a slight leak. Approx 1 tablespoon on the longest cycle.

    The water drips onto the motor mounting plate and into the base plate.
    I am guessing that the sump seal is leaking slightly.

    The water does not go near any electrics.
    Is it safe just to leave it – Would it evaporate?
    Are there any tricks/substances for ensuring a good seal?
    Or is a replacement seal required?

    Any advice appreciated.
    Ian

    January 18, 2006 at 4:29 pm #161334
    Simon46
    Participant

    Re: Electrolux ESl 424 slight leak

    No the leaking water is not safe! Difficult to say what is wrong without looking. Check out Repairs@ for an engineer.

    Regards
    Simon.

    January 18, 2006 at 5:48 pm #161335
    NWAR
    Moderator

    Re: Electrolux ESl 424 slight leak

    Please unplug this appliance and do not use it until the fault has been repaired. Water leaking onto the motor presents a risk of fire, although more likely it would just trip the electrics.

    :plug:

    January 18, 2006 at 9:05 pm #161336
    imck
    Participant

    Re: Electrolux ESl 424 slight leak

    The machine is not installed at the moment.

    I did some testing in the garden using a RCD trip with the covers off after having cleaned the sump out.

    I think I already knew the answer to the ‘is it safe’ question!!!
    Water and electricity hmmm…

    I am looking for suggestions/tips on how to ensure a good seal.

    Cheers
    Ian

    January 18, 2006 at 9:45 pm #161337
    Simon46
    Participant

    Re: Electrolux ESl 424 slight leak

    Do not use sealant of any kind.
    Something is wrong.
    Please get a pro in or look at it again.

    Simon

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.