Bosch condensor dryer – belt

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch condensor dryer – belt

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 18, 2006 at 4:57 pm #14933
    grooster
    Participant

    Hi,

    I’ve got a Bosch Tumble Dryer WTL6003GB FD 8308 000775.

    This is the White Knight version of the machine and i need a belt for it. I havent seen the size of the belt to get a non genuine. The genuine price of the belt is £36.00 plus.

    Its a swine of a job i know, ive done a few on the white knights. I used to order the rear fan blades until recently when i discovered the nack of getting them off in one piece.

    If anybody can come up with the size of the belt for me or an alternative part number i would be very grateful.

    Thanks for your help

    Nick

    January 19, 2006 at 2:51 pm #161353
    grooster
    Participant

    Re: Bosch condensor dryer – belt

    Nobody got any ideas? looks like i’m going to have to buy a £40 belt.

    Bugger…..

    January 19, 2006 at 2:58 pm #161354
    Martin
    Participant

    Re: Bosch condensor dryer – belt

    grooster wrote:Nobody got any ideas?

    Without giving us the numbers from the old belt I don’t think we can help ❓

    January 19, 2006 at 6:48 pm #161355
    Penguin45
    Participant

    Re: Bosch condensor dryer – belt

    1810H8 173373BSH, 4213 092 19501 Crosslee, 09CS02 Maddocks.

    Chris.

    January 20, 2006 at 8:31 am #161356
    grooster
    Participant

    Re: Bosch condensor dryer – belt

    Your a star Chris.

    Thanks very very much.

    Nick

    January 23, 2006 at 11:22 pm #161357
    megawatt
    Participant

    Re: Bosch condensor dryer – belt

    Hi Grooster,
    I’m still using a hammer to remove the rear fan. Whats the nack?
    Regards,
    Mike.

    January 24, 2006 at 8:51 am #161358
    grooster
    Participant

    Re: Bosch condensor dryer – belt

    Hi,

    I take the bolt out of the fan and spray oil inside. Then i get 2 screwdrivers, long ones, one at either side of the fan blades, push them under the sides of the blades and pull each one up simultanelously, keeping quite an eaven pressure and they will start to move ever so slightly. Just keep wiggling those screwdriver up and down and it should come.

    Its never let me down since i discovered it.

    Hope this works for you.

    Nick

    January 25, 2006 at 10:22 pm #161359
    megawatt
    Participant

    Re: Bosch condensor dryer – belt

    Thanks for the tip Nick.I’ll give it a try next time,
    Regards,
    Mike.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.