AEG L74630 AUTO CAUSING PROBLEMS.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG L74630 AUTO CAUSING PROBLEMS.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 25, 2006 at 9:39 am #15102
    whiskeyjack6058
    Participant

    We have the above AEG auto causing problems. PNC 914002097 03
    Serial 20376119.
    Origonal fault was the machine wouldnt start. It offered no error code and just went dead almost like a door interlock fault. Changed the door lock, to no avail so we ordered a new main control pcb.
    After fitting the new control pcb, the machine now displays E50 error code. Perhaps the pcb may require configuring. Anybody have an idea?
    Thank you.
    Rob.

    January 25, 2006 at 9:56 am #162111
    Dave_Conway
    Participant

    Re: AEG L74630 AUTO CAUSING PROBLEMS.

    The part number should have been 407 13 18-93/7 and is a non-configured PCB so yes it will need to be done 😉

    If you need the config/diagnostics, let me know and I’ll send them (large file – broadband required)

    Dave.

    January 25, 2006 at 1:51 pm #162112
    whiskeyjack6058
    Participant

    Re: AEG L74630 AUTO CAUSING PROBLEMS.

    If you could send me the diagnostics for this machine I would be very greatfull! Our email address is northerndomestic@btconnect.com.
    Thank you very much!
    Rob.

    January 25, 2006 at 2:20 pm #162113
    Dave_Conway
    Participant

    Re: AEG L74630 AUTO CAUSING PROBLEMS.

    On the way 🙂

    If you don’t get them by later today let me know as large attachments seem to go astray from my email address at time.

    Dave.

    January 26, 2006 at 11:20 am #162114
    whiskeyjack6058
    Participant

    Re: AEG L74630 AUTO CAUSING PROBLEMS.

    Thank you very much for your help Dave.
    Regards.
    Rob.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.