Indesit DI62

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit DI62

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 26, 2006 at 9:33 am #15136
    grooster
    Participant

    Hi,

    I’ve just been to a DI62 integrated indesit dishwasher. It had the usual water in the base. Found the culprit to be a loose centre shaft. Cleaned out all the water in the base and thought this would be the end of my problems.

    When i put the machine back on, none of the indicator lights would light up, even when pressing the programme button.
    All i can get to work is the test programme, lights will come on then and go through a cycle.
    Am i missing something, is it stuck in test sequence? Its never done this before for me.

    Any help would be appreciated.

    Thanks

    Nick

    January 26, 2006 at 10:09 am #162282
    nigegt
    Participant

    Re: Indesit DI62

    Hi

    Have come across similar problems with these, sometimes caused by a damp float microswith in the base (hair dryer job) If still no joy then its nearly always the control pcb

    Nige

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.