Whirlpool ADP 5966 Error Code F7

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADP 5966 Error Code F7

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 28, 2006 at 10:22 pm #15217
    tazzman916
    Participant

    Hi my d/washer is showing error code F7, once I press the start buton it clears the problem. Then the d/washer gose as normall for 3 washes then the error code comes up again. I have just fixed a leak that it had from the pump, which I replaced a bit of hose.

    Regards Anthony

    January 28, 2006 at 10:43 pm #162663
    DentedPorsche
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    F7 refers to a problem with the flow meter.

    Chances are you’ll require an engineer for this one. Click on the repairs@ to check for your postcode.

    DP

    January 29, 2006 at 12:31 am #162664
    gegsy
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    Worth checking for low water pressure and kinked fill hose. If they are fine then DP already directed you.

    Greg

    February 1, 2006 at 9:20 pm #162665
    tazzman916
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    Hi many thanks it was a kinked hose
    Regards Ant

    February 1, 2006 at 9:22 pm #162666
    gpw-it
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    Hi – I am having exactly this problem – So far I have checked the pressure – & replaced the water-in hose – works fine for a couple of days then F7 again. I have had an engineer out – apparently there is a water wheel sensor on the input – either this is sending wrong reading or the main control is not reciving and processing this reading OK. New wheel/ control unit and engineer charges have meant we are giving up and getting a new machine. In my opinion there are FAR to many electrical sensor components on modern machines. Our dishwasher works fine – it’s just the control unit thinks it has a problem… Very annoying.. 😥

    February 1, 2006 at 10:31 pm #162667
    gegsy
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    It will be flow wheel sticking I imagine. A change of the l/h tank which comes complete with the flow meter approx £30 will sort that. Had one last week intermittent little sod 😆

    Greg

    February 2, 2006 at 12:01 am #162668
    Penguin45
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    gegsy wrote:flow meter approx £30 will sort that.
    Greg

    Nearer £50 now, Gegsy. Still, £400 dishwasher? I’d have thought it a worthwhile repair.

    Penguin45.

    February 2, 2006 at 12:03 am #162669
    gegsy
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    Yea nice dishwashers to work on. Better then someof the cack we see 🙂

    Greg

    February 2, 2006 at 12:27 pm #162670
    gpw-it
    Participant

    Re: Whirlpool ADP 5966 Error Code F7

    Hi – yes an engineer looked at the LH tank and we saw the flow meter wheel spinning fine – he said it could also be the control unit – potentially replacing both could be pricey. I have been advised to get a Hotpoint Aquarius FDW60 if I replace – what do you think??

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.