Fisher & Paykel MW058U Starts 7 Stops

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel MW058U Starts 7 Stops

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 31, 2006 at 11:51 pm #15280
    Lurch
    Participant

    I have a model MW058U that starts and stop filling and draing and will not wash or spin. After a short while it will beep continuously.
    The light pattern from right to left is 11010000 from the diags mode with slow spin and hold leds on.

    Thanks in advanced.

    February 1, 2006 at 12:14 am #162918
    Penguin45
    Participant

    Re: Fisher & Paykel MW058U Starts 7 Stops

    You rang?

    I think you’ll find that this is the water level control system playing up. With the machine empty and the power off, check that the tube from the airbell at the bottom of the tub to the level switch is not trapped, kinked trapped or holed or contains water. Blow clear if so.

    Slight possibility of electronic board failure, but this is unusual.

    Regards,
    Penguin45.

    February 3, 2006 at 1:21 pm #162919
    Lurch
    Participant

    Re: Fisher & Paykel MW058U Starts 7 Stops

    Thanks,
    The tube was kinked.
    Now it works like a charm.
    Regards
    Lurch

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.