Indesit WD12

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WD12

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 1, 2006 at 1:13 pm #15288
    keng
    Participant

    Hi

    I had 15 flashes and the rotating dial halfway through a wash cycle.
    So I did the reset routine.. Then then drain programme.

    Now when I turn the machine on after about 8 secs , before anything actually happens and on ANY programme , I have 10 flashes with that damn rotating dial.

    Any ideas please. I’ve already had a new module put in last year

    cheers 😀

    February 1, 2006 at 2:08 pm #162949
    Martin
    Participant

    Re: Indesit WD12

    15 flashes refers to a ‘dryer element’ fault or its thermal coupling?

    10 flashes is a water level sensing error?

    Module connector plugs are always a very suspect and weak point that can give these errors also 😉

    February 3, 2006 at 1:05 pm #162950
    keng
    Participant

    Re: Indesit WD12

    Thanks Martin

    I have an engineer from the repairs@ coming out next week

    Ken

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.