- This topic has 6 replies, 5 voices, and was last updated 20 years, 2 months ago by
.
-
Posts
-
Hi all ive just been to this f/f and its not getting cold enough . It is standing in a garage and its cold in the garage ,took the front panel off and part of the control board is burned out it looks like a triac but not to sure . The appliance is still running ok though and is getting a bit cold . does anyone know what the part no is for the board from qer or anywhere else? thanks for any info.
Re: bosch kgv3104gb/03 fridge freezer
Part number 265109 at £91.65 from Bosch (list price).
I don’t think EMW do refrigeration PCB’s but QER do:
Dave.
Re: bosch kgv3104gb/03 fridge freezer
This model is affected by ambient temp problems, no seperate stat for freezer just works off the fridge stat.
Will tell you in the instruction manual suitable temp for m/c. :lesson:
Would defo advise checking the ambient first.
Re: bosch kgv3104gb/03 fridge freezer
Also check that it has not been fitted with ‘power saver’ plugtop, this will always eventually burn out the circuit board.
Regards
SparkeyRe: bosch kgv3104gb/03 fridge freezer
sparkey wrote:Also check that it has not been fitted with ‘power saver’ plugtop, this will always eventually burn out the circuit board.
Regards
Sparkey
Wise words!
:lesson: :tup:Re: bosch kgv3104gb/03 fridge freezer
Spoke to qer today and they said scrap the appliance!!! Apparantly if the machine is running its not the board faulty its the thermistors which they say are mounted inside the insulation at manufacture and cannot be replaced ,is this correct?
Re: bosch kgv3104gb/03 fridge freezer
http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=5129
Still think it could be an ambient problem though.
- You must be logged in to reply to this topic.