AEG Lavamat Fault

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG Lavamat Fault

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 7, 2006 at 10:25 am #15456
    john
    Participant

    AEG OKO Lavanat 605 Electronic

    When starting any wash cycle the machine is stuck in pump mode and does not procede to fill.

    Checked connections to switches and modules.. all OK.

    I suspect the Pressure Switch could be faulty or probably rattled out of adjustment, as when I blew into it (with the mains plug out, of course!) I could hear the contacts making/braking. When I reconnected everything the machine burst into life and ran few cycles OK… then went back to the original fault.

    Am I correct in my diagnosis or could there be a problem on the other end of the pressure pipe?

    I would be grateful for your advice and also price & availability of the switch, if this is required.

    Forgot to note the full part/serial no of the machine which I’m sure you’ll need…. I’ll have to post these later!

    Cheers! John.

    February 7, 2006 at 11:13 am #163661
    Goatboy
    Participant

    Re: AEG Lavamat Fault

    john wrote:…or could there be a problem on the other end of the pressure pipe?

    Sounds very likely! 🙂

    john wrote:(with the mains plug out, of course!)

    Very good! 😀

    There’s a 9 dight ‘enr’ number for any spares you need!

    February 8, 2006 at 12:44 pm #163662
    john
    Participant

    Re: AEG Lavamat Fault

    Thanks for your reply.

    ENR 605.636.406
    Fnr 062080379
    Type 44_OQB_03

    Would be grateful if you could advise Part No, Price & Delivery for the Pressure Switch for this machine.

    Thanks again!
    John

    February 8, 2006 at 1:16 pm #163663
    Dave_Conway
    Participant

    Re: AEG Lavamat Fault

    8996452446512 at £31.37 ex VAT and carriage (c £4), 3-5 days lead time.

    Email to spares@ukwhitegoods.co.uk please if you do need to order.

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.