Hoover Washer Drier HW130M

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Washer Drier HW130M

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 7, 2006 at 5:44 pm #15469
    Phidom
    Participant

    Machine is not spinning when on spin, on wash it only agitates in the anticlockwise direction. I suppose the fault is with the direction change switching. Is this done by the timer or the module? My guess would be the timer but it would be nice to get confirmation before ordering a new one.

    February 7, 2006 at 6:19 pm #163688
    Bryan
    Participant

    Re: Hoover Washer Drier HW130M

    I`d have a good look at the module , quite often dry joint/blown solder at one of the relays 😉 .Easy fix with a soldering iron 😀 .

    Bryan

    February 8, 2006 at 8:28 am #163689
    Phidom
    Participant

    Re: Hoover Washer Drier HW130M

    The gravy thickens 😕 Just looked on Connect and they don’t list much for this model so tried Masterpart. They list part No. 92884212, described as “Timer Link / Direction Control”. There is no photo or price so I don’t know what it is.

    February 8, 2006 at 8:48 am #163690
    Martin
    Participant

    Re: Hoover Washer Drier HW130M

    I’m with Bryan on this fault – burnt relay terminal on module (91200606).

    A blob of solder will sort, stick new brushes in whilst you’re there 😉

    February 8, 2006 at 9:20 am #163691
    Phidom
    Participant

    Re: Hoover Washer Drier HW130M

    Thanks gents, will do. :tup:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.