Beko Module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Beko Module

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 8, 2006 at 12:52 pm #15483
    Phidom
    Participant

    I need a module for a Beko WMA1512S. I believe the part number is 2804760583 but Masterpart list this as “No longer available”. I wondered if the module from a WM1512S would fit but this is listed as 2804760190. Are these different or equivalent?

    February 8, 2006 at 1:09 pm #163758
    Phidom
    Participant

    Re: Beko Module

    Sorry, just looked on Seme and they list the same module for both models so it looks like the available part superseded the obsolete one.

    February 8, 2006 at 1:11 pm #163759
    Dave_Conway
    Participant

    Re: Beko Module

    2804760583 is the correct part number, SEME have it in stock (about £70 😯 )

    Connect list it as their part number 5031680283655 but don’t recognise the genuine part number above for some reason 😕

    Dave.

    February 12, 2006 at 10:08 pm #163760
    Phidom
    Participant

    Re: Beko Module

    Mike from Penzance sent me a board but unfortunately it smoked when I tried it, although the machine worked OK. Mikes board was labelled Y190192, the same as the one shown on Connect but the board on this machine was labelled TR0010. They looked identical but perhaps there is a subtle difference?
    ❓

    February 15, 2006 at 6:54 pm #163761
    Phidom
    Participant

    Re: Beko Module

    Board arrived from Connect today. The Connect yellow label says 5031680283655, the Beko label says 2804760190 😉

    February 15, 2006 at 9:28 pm #163762
    leavemetogetonwithit
    Participant

    Re: Beko Module

    ❓ Was the board I sent not labelled 2804760100 ❓ If so it seems pretty likely it’s the same board. Best wire a smoke detector in series with it. 😆
    Mike.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.