Diplomat Dishwasher ADP8242 error code unknown

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Diplomat Dishwasher ADP8242 error code unknown

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #15550
    malkers
    Participant

    Hi,

    My diplomat dishwasher is not working, when I turn it on, the strong light flashes on and off continuously, with a beep noise sounding once. I unfortunately dont have a manual (rental accomodation).

    Be very grateful if someone can tell me whats going on here!

    #164022
    Dave_Conway
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    You should have at least one light on all the time and at least one flashing for an error code for this model.

    Counting from the left as lamp 1 can you let us know which are on/off and flashing please.

    Dave.

    #164023
    malkers
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    the fourth lamp from the left is flashing.

    #164024
    Dave_Conway
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    That’s not a known error code then I’m afraid.

    It may be another component causing a sortware error on the PCB, engineer time to be honest, check the repairs@ link below 🙂

    Dave.

    #164025
    gegsy
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    Hi
    Cant see that fault but can see 4th from right (glass symbol) flashing and that would indicate E2 error or an overfill has occured.

    Greg

    #164026
    rup
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    My machine is identical model number and has developed an identical fault
    has a solution been found to this problem?

    Rup

    #164027
    Penguin45
    Participant

    Re: Diplomat Dishwasher ADP8242 error code unknown

    Check this, rup:
    http://www.ukwhitegoods.co.uk/modules.p … pic&t=8046

    HTH,
    Penguin45.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.