Indesit WD12S

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WD12S

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 16, 2006 at 8:37 pm #15695
    andy_b
    Participant

    I have an Indesit WD12S, was playing up a bit over a few months ago (occaisionally not completing the program), but arrived home today (left a program running whilst out) to find water all over the floor, and the dial going round and round.

    The machine itself had drained, but clothes inside were very wet, so I reset the machine and then tried the spin cycle. This started, but only spun slowly and soon entered the error state, as before.

    There is one flash per 10 seconds.

    Any indication on what the error code means would be very helpful.

    thanks

    Andy

    February 17, 2006 at 12:33 am #166033
    Penguin45
    Participant

    Re: Indesit WD12S

    Tricky – level switch failure/air leak to level switch/blockage in pressure chamber to air switch all possibilities. Had an Indesit today which filled regardless of programme selected – board failure.

    Time for pro help? Click the link below. Power off if investigating further.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.