Prima LPR 600 DDDR fault (854560045810)

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Prima LPR 600 DDDR fault (854560045810)

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 18, 2006 at 4:28 pm #15730
    bellywash
    Participant

    Hi Folks!
    I have finally located the problem with my dishwasher.
    The DDDR sensor located on the left hand side of the machine is faulty.
    The machine will run for a week to ten days then the machine starts to bleep and flash 6 times. somtimes seven. If i unsrew the lefthand side panel and disconnect and reconnect the DDDR sensor plug the machine will then run for a further week to ten days. I am unsure if this is the correct name for this part. Please can someone tell me the correct term as i need to replace this part.

    Many Thanks!

    February 18, 2006 at 5:47 pm #166135
    gegsy
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    Hi
    Correct model 854560015810 for your info.

    The unit you describe sounds like the Flow Meter. I cannot see one on teh diagram though 😕 Usually built into the water tank on the left thand side.

    Greg

    February 19, 2006 at 12:02 pm #166136
    bellywash
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    Thanks Greg!
    Does this mean i have to change the complete water tank?
    Have just checked the machine and now the water will not heat.
    Any suggestions!

    February 19, 2006 at 2:52 pm #166137
    bellywash
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    Sorry!
    Forget the water heating problem.
    Sorted!

    February 19, 2006 at 2:58 pm #166138
    Dave_Conway
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    The flow meter is part of the chamber yes, it’s around £50 plus carriage.

    An email to spares@ukwhitegoods.co.uk please if required 🙂

    Dave.

    February 19, 2006 at 3:19 pm #166139
    bellywash
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    Hi Dave!
    Is replacing the chamber a big job.
    This dishwasher is becoming my pet project
    and i would like to see it through, after cutting my fingers so many times.
    Have sent e-mail with photo attached

    James

    February 19, 2006 at 3:22 pm #166140
    gegsy
    Participant

    Re: Prima LPR 600 DDDR fault (854560045810)

    Hi Belly ,
    No its a breeze. L/H panel off, unscrew collar inside cavity on L/H side,unplug lead to flow meter and tank pops out of o ring slots. Just have some towels handy 😉 .

    Greg

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.