Belling 6060c cooling fan no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Belling 6060c cooling fan no go

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 27, 2006 at 6:39 pm #15943
    cornwell40
    Participant

    Had a quick look at this tonight (just finished using it when I got there)
    The cooling fan and hob hot light dont work. Plus I’m pretty sure they mentioned the tube being off as well.
    Any links, could it be stat controlled or is it a trigger board. 😕
    Booked for later int’ week.

    Tony C

    February 27, 2006 at 11:34 pm #166835
    Dave_Conway
    Participant

    Re: Belling 6060c cooling fan no go

    Check the huge multi-plug which connects the control panel to the rest of the cooker, prone to frying themselves 😉

    I can’t for the life of me remember which side panel to remove to access it though 😕

    Dave.

    February 28, 2006 at 8:42 pm #166836
    SWERV
    Participant

    Re: Belling 6060c cooling fan no go

    💡 If I remember correctly, you have to remove the right hand side panel( looking from the front of the cooker).
    Merv

    March 1, 2006 at 10:15 am #166837
    cornwell40
    Participant

    Re: Belling 6060c cooling fan no go

    Cheers Gents 🙂

    I remember this one from the dim and distant now.
    Black melted mess that cost a fortune when they decided to go with the complete plug being replaced. Loads of wires fused together,so they all had to be cut back and pieced out. Took for ever tracing back the wires with the diagram to see where they went 😥
    TC

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.