dwf50 no lights!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › dwf50 no lights!

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 5, 2006 at 7:32 am #16106
    taff68
    Participant

    😈
    Does anyone know why when you have fixed a leaky hose, stopped the machine from not pumping out the water….to putting the machine on a rinse to see if it works and the rinse programe doesn’t stop and next the lights go out on the machine and all you get if beep…beep when you touch the buttons but no lights….is this a major problem or a quick fix ?

    March 5, 2006 at 12:02 pm #167557
    Dave_Conway
    Participant

    Re: dwf50 no lights!

    Where was the leaky hose ?

    The leak may have caused some component damage 🙁

    Power off please when checking :zap:

    Dave.

    March 5, 2006 at 1:48 pm #167558
    taff68
    Participant

    Re: dwf50 no lights!

    Leak was on the drain hose which had dripped into the sump triggering the cut off……repaired then dried out…..switched onto a never ending rinse cycle! switched the machine off and machine never came back on!

    March 5, 2006 at 7:35 pm #167559
    Dave_Conway
    Participant

    Re: dwf50 no lights!

    It may be that the switch got wet and damaged the PCB in that case 🙁

    If you need a engineer, check the repairs@ link below who should be able to tell for sure.

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.