Servis M6011S w/m

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Servis M6011S w/m

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 6, 2006 at 10:25 am #16123
    reaper
    Participant

    New type plastic tub with a large hole in the front half that flooded floor.Is the job worth doing? Customer says she will pay up to £100 for the job, personally I dont think a brand new Servis is worth that but times are hard etc….
    I’ve not had one of these before and need to know part no. and price.

    March 6, 2006 at 11:57 am #167613
    Washman
    Participant

    Re: Servis M6011S w/m

    Hi

    Servis Part no 398233000 , Connections 5031680633931 SRP£37.20
    Trade Price £28.49 in stock

    Mike

    March 6, 2006 at 3:36 pm #167614
    euro
    Participant

    Re: Servis M6011S w/m

    The list price for drum from Servis (gbdar) is £25.00 or £21.25 trade. Theres a new type door gasket 404002600 list £22.98 or trade £19.53 thats should be fitted if ever you change the from half of the tub, it stops any coins going into the drum causing it to burst. Hope this helps abit.

    Andy

    March 6, 2006 at 7:26 pm #167615
    timdowning
    Participant

    Re: Servis M6011S w/m

    Complete tub removal to do this repair, i would say it’s to much work for £100. (Considering cost of spares required.) These new servis are more tricky than a wma as front panel dosen’t come off.

    March 8, 2006 at 11:18 pm #167616
    barryfast
    Participant

    Re: Servis M6011S w/m

    Hi have repaired lot’s of the servis drums and hotpoint with epoxy resin
    and none back. 💡 barryfast

    March 12, 2006 at 12:54 am #167617
    reaper
    Participant

    Re: Servis M6011S w/m

    Thanks boys for the advice, the customer decided on a new m/c.The hole was too large for epoxy (3 finger dilation).Had an even bigger one yesterday on an Indesit could get your fist in it. Oh for the old days when we used to braize pennies onto the steel tanks.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.